Tiếng Việt
Continuous oil-in-water monitoring for the right price
Even the smallest oil traces impair water quality. The probe monitors surface waters, process water and industrial water continuously for even traces of mineral oil contamination. The highly sensitive UV fluorometer is immersed directly in the medium. For reliable, long term stable hydrocarbon monitoring, intensity fluctuations of the flash lamp are compensated. Influences associated with daylight are automatically eliminated. The probe can be combined with additional sensors on the SC controllers.
| Ambient Temperature | -5 – 45 °C (23 – 113 °F) |
| Body material | Titanium |
| Body Material | Titanium |
| Cable Length | 10 m (32.8 ft) |
| Calibration | Factory calibrated with UV fluorescence standard or process calibration with results of a grab sample analysis. |
| Controller Compatibility | SC4500, SC1000, SC200 |
| Detector | UV photodiode with interference filter; Compensation of daylight and flashlamp intensity fluctuations |
| Diameter | 68 mm |
| Excitation | Wavelength 254 nm |
| Length | 311 mm |
| Light Source | Miniature xenon flashlamp with interference filter |
| Material | Housing: titanium |
| Measurement Method | UV fluorescence method for polycyclic aromatic hydrocarbons (PAH) |
| Measurement Range 2 | 0 – 500 ppb (µg/L) PAK, based on calibration standards |
| Measuring range | 0.1 – 15 ppm (mg/L) Oil, based on calibration standard |
| pH Value(s) | ≥ 4 |
| Pressure Range | Max 30 bar or 435 psia (measurement probe) |
| Range | 0 – 500 ppb (µg/L) (PAH) or 0.1 – 15 ppm (mg/L) (Oil) |
| Reproducibility | 2.5 % of measured value at constant temperature |
| Response Time T90 | 10 s |
| Sample Temperature | 1 – 40 °C (33.8 – 104 °F) |
| Sensor cleaning | No |
| Storage Conditions | -40 °C – 60 °C |
| Warranty | 12 months |
| Weight | 1.8 kg |
| What’s included? | Oil-in-water probe, user manual |
