Tiếng Việt
The first maintenance-free optical oxygen sensor for power plants.
Pre-configured Kit containing dual-channel Orbisphere controller 510KK0/P1C00000, 2x high accuracy Luminescent Dissolved Oxygen sensors K1100-S00, 2x 5 m sensor cable, and 2x 6 mm flow chamber. Specially designed for power plants (non-nuclear).
The Orbisphere K1100 optical sensor together with the Orbisphere controller offers a new way of monitoring oxygen in power plants. Orbisphere sensors set the industry standards for oxygen measurement by offering peace of mind to every water chemist.
| Accuracy | ± 0.8 ppb or 2 % whichever is greater |
| Ambient Temperature | -5 – 50 °C (23 – 122°F) |
| Analog Outputs | 3 Smart 0/4 to 20 mA (500 Ohms) programmable as linear or tri-linear, configurable to send diagnostics or alarm informations. |
| Application | Power |
| Calibration | Single point zero calibration with standard 99.999% nitrogen (quality 5.0) or equivalent oxygen free gas |
| Certifications | 2004/108/EC – EN 61326-1 |
| Communication Capabilities | 3 x 0/4-20 mA; RS485; Ethernet |
| Controller | Panel |
| Controller Options | 510 Multi-Channel Controller |
| Display Resolution | 0.1 ppb |
| Lower Limit of Detection (LOD) | 0.6 ppb |
| Mounting | Two 6 mm flow chambers |
| Parameter | Oxygen |
| Power Requirements (Voltage) | 100 – 230 VAC |
| Range | 0 – 2000 ppb dissolved O₂ (DO) |
| Relays | Measurement board: 3 measurement alarm relays (1A-30 VAC or 0.5A-50 VDC), configurable to send diagnostics information. Main board: 1 system alarm relay (1A-30 VAC or 0.5A-50 VDC). |
| Repeatability | ± 0.4 ppb or 1 % whichever is greater |
| Reproducibility | ± 0.8 ppb or 2 % whichever is greater |
| Response Time | (90%) <10 s (gas phase); <30 s (liquid phase) |
| Sample Flow Rate | 50 – 300 mL/min |
| Sample Pressure | 1 – 20 bar absolute (14.5 – 290 psi) |
| Sample Temperature | -5 – 50°C (23 – 122°F) |
| Sensors | Two K1100 LDO |
| Storage Conditions | -5 °C – 100 °C |
| Temperature Range | Accurate from -5 – 50 °C (23 – 122 °F) Resistant – temperature from -5 – 100 °C (23 – 212 °F) |
| Warranty | 12 months |
| Weight Sensor | 0.6 |
| What’s included? | 1x Orbisphere controller 510KK0/P1C00000, 2x K1100-S00 sensor (low level), 2x 6 mm flow chamber 32001.010, 2x 32510.05 sensor cable (5 m) to connect M/K-type sensor with Orbisphere 510 instruments |
