Tiếng Việt
The Analog Conductivity module for the SC200 is a user installed module that allows for connection of analog conductivity sensors to the controller. This module works with both contacting and inductive analog conductivity sensors. See manual for additional connection information.
| Calibration Method | Zero GLI DRY-CAL 1-point sample |
| Calibration Method 2 | 1-point Cond (or Concentration or TDS) Zero |
| Dimensions (H x W x D) | 144 mm x 144 mm x 181 mm |
| Length | 181 mm |
| Measuring Range Concentration 2 | Inductive Conductivity |
| Measuring Range Conductivity | 0 – 2.000 µS/cm |
| Measuring Range Conductivity 2 | 0 – 20.00 µS/cm |
| Measuring Range Conductivity 3 | 0 – 200.0 µS/cm |
| Measuring Range Conductivity 4 | 0 – 2000 µS/cm |
| Measuring Range Conductivity 5 | 0 – 2.000 mS/cm |
| Measuring Range Conductivity 6 | 0 – 20.00 mS/cm |
| Measuring Range Conductivity 7 | 0 – 200.0 mS/cm |
| Measuring Range Resistivity | 0 – 19.99 MΩcm |
| Measuring Range Resistivity 2 | 0 – 999.9 kΩcm |
| Measuring Range TDS | 0 – 9999 ppm |
| Measuring Range TDS 2 | 0 – 9999 ppb |
| Repeatability | 20 – 200,000 µS/cm, K=1: ± of reading |
| Repeatability | 0 – 20 µS/cm, K=1: ± 0.02 µS/cm 0.02 µS/cm |
| Response Time | 0.5 s |
| Sensor to Controller Distance | Inductive Conductivity Full-scale value |
| Sensor to Controller Distance (Maximal) | max. length: 91 m (300 ft) |
| Temperature Accuracy | ± 0.5 °C |
| Temperature Compensation | Automatic from -20 – 200 °C or manual |
| Temperature Compensation | Automatic from -4 – 392 °F or manual |
| Temperature Compensation Curves | Linear, Ammonium, Natural Water, user defined, none |
| Temperature Drift | > 20 µS/cm: ± 0.02 % of reading / °C |
| Temperature Range | Manual -20 – 200 °C |
| Temperature Range 2 | N/A N/A N/A |
| Temperature Sensor | PT100 / PT1000 |
| What’s included? | Module, Manual |
