English
General description
Chromolith® columns are made of monolithic silica with a characteristic bimodal pore structure.
Chromolith® HighResolution RP-18 endcapped columns have macropores with 1.15 μm diameter, giving a column efficiency exceeding 140,000 plates/meter. The mesopores are 15 nm (150 Å), the surface modification is octadecylsilane with full end-capping. Chromolith® HighResolution RP-18 endcapped columns fall under the USP L1 Classification. The column efficiency is comparable to a 2.7 to 3 μm particle size fully porous particulate column. Chromolith® HighResolution RP-18 endcapped columns are perfectly suitable for LC-MS applications.
The column dimension of 100 mm length and 4.6 mm I.D. is the best choice for high resolution separations of complex compound mixtures on any HPLC System.
The revolutionary, monolithic silica with its unique combination of macropores and mesopores enables:
—Rapid separations at very low column back-pressure
—High matrix tolerance, allowing time and cost savings with simplified workflows
—Cost-savings due to extended column lifetimes
—Connection of columns, flow gradients and the use of mobile phases with higher viscosity
The recommended Guard-columns are:
Chromolith® HighResolution RP-18 endcapped 5-4.6 guard cartridges (3 pieces) [1.52025] with the Chromolith® Guard Cartridge Holder 5 mm x 4.6 mm [1.52032]
The Chromolith® column coupler can be used to significantly increase the separation efficiency of Chromolith® columns by coupling several columns in series (up to 100,000 plates/per column). [1.51467]
Learn more:
Brochure: Race through your Separations on Any System. Chromolith® Monolithic Silica HPLC Columns
All Supelco HPLC Columns, including monolithic Chromolith® columns, are fully compatible to all HPLC and UHPLC Instruments.
Supelco HPLC Products: The Best Choice for Any LC Instrument
Chromolith® HighResolution RP-18 endcapped columns are also available in 2 mm I.D. column dimension for perfect fit to UHPLC and UHPLC-MS needs.
Flyer: UHPLC-like performance – Rapid and Robust at Low Pressure – Chromolith® HighResolution RP-18 endcapped 2 mm I.D. HPLC Columns
Application
A Novel and Sensitive LC-MS/MS Method for the Quantitation of Ceftiofur in Pharmaceutical Preparations and Milk Samples.: This study, conducted by Levent et al., introduces a highly sensitive LC-MS/MS method for quantifying ceftiofur in pharmaceutical preparations and milk samples. The method utilizes Chromolith® HighResolution RP-18 endcapped columns, showcasing their application in enhancing the resolution and sensitivity of chromatographic analysis in complex matrices (Levent et al., 2021).
Analysis Note
Appearance: passes test
Pressure: 40 – 70 bar
stability testing: passes test
Performance (anthracene)
Theoretical Plates (N/m) (Anthracene): ≥ 140000
Capacity factor (Anthracene): 3.9 – 4.6
Tailing (USP): 0.90 – 1.30 %
Selectivity
separation factor (anthracene/progesterone): 1.95 – 2.35
Legal Information
Chromolith is a registered trademark of Merck KGaA, Darmstadt, Germany
